yamux/session.go

package yamux

import (
	"bufio"
	"fmt"
	"io"
	"io/ioutil"
	"log"
	"math"
	"net"
	"strings"
	"sync"
	"sync/atomic"
	"time"
)

// Session is used to wrap a reliable ordered connection and to
// multiplex it into multiple streams.
type Session struct {
	// remoteGoAway indicates the remote side does
	// not want futher connections. Must be first for alignment.
	remoteGoAway int32

	// localGoAway indicates that we should stop
	// accepting futher connections. Must be first for alignment.
	localGoAway int32

	// nextStreamID is the next stream we should
	// send. This depends if we are a client/server.
	nextStreamID uint32

	// config holds our configuration
	config *Config

	// logger is used for our logs
	logger *log.Logger

	// conn is the underlying connection
	conn io.ReadWriteCloser

	// bufRead is a buffered reader
	bufRead *bufio.Reader

	// pings is used to track inflight pings
	pings    map[uint32]chan struct{}
	pingID   uint32
	pingLock sync.Mutex

	// streams maps a stream id to a stream
	streams    map[uint32]*Stream
	streamLock sync.Mutex

	// synCh acts like a semaphore. It is sized to the AcceptBacklog which
	// is assumed to be symmetric between the client and server. This allows
	// the client to avoid exceeding the backlog and instead blocks the open.
	synCh chan struct{}

	// acceptCh is used to pass ready streams to the client
	acceptCh chan *Stream

	// sendCh is used to mark a stream as ready to send,
	// or to send a header out directly.
	sendCh chan sendReady

	// recvDoneCh is closed when recv() exits to avoid a race
	// between stream registration and stream shutdown
	recvDoneCh chan struct{}

	// shutdown is used to safely close a session
	shutdown     bool
	shutdownErr  error
	shutdownCh   chan struct{}
	shutdownLock sync.Mutex
}

// sendReady is used to either mark a stream as ready
// or to directly send a header
type sendReady struct {
	Hdr  []byte
	Body io.Reader
	Err  chan error
}

// newSession is used to construct a new session
func newSession(config *Config, conn io.ReadWriteCloser, client bool) *Session {
	s := &Session{
		config:     config,
		logger:     log.New(config.LogOutput, "", log.LstdFlags),
		conn:       conn,
		bufRead:    bufio.NewReader(conn),
		pings:      make(map[uint32]chan struct{}),
		streams:    make(map[uint32]*Stream),
		synCh:      make(chan struct{}, config.AcceptBacklog),
		acceptCh:   make(chan *Stream, config.AcceptBacklog),
		sendCh:     make(chan sendReady, 64),
		recvDoneCh: make(chan struct{}),
		shutdownCh: make(chan struct{}),
	}
	if client {
		s.nextStreamID = 1
	} else {
		s.nextStreamID = 2
	}
	go s.recv()
	go s.send()
	if config.EnableKeepAlive {
		go s.keepalive()
	}
	return s
}

// IsClosed does a safe check to see if we have shutdown
func (s *Session) IsClosed() bool {
	select {
	case <-s.shutdownCh:
		return true
	default:
		return false
	}
}

// NumStreams returns the number of currently open streams
func (s *Session) NumStreams() int {
	s.streamLock.Lock()
	num := len(s.streams)
	s.streamLock.Unlock()
	return num
}

// Open is used to create a new stream as a net.Conn
func (s *Session) Open() (net.Conn, error) {
	conn, err := s.OpenStream()
	if err != nil {
		return nil, err
	}
	return conn, nil
}

// OpenStream is used to create a new stream
func (s *Session) OpenStream() (*Stream, error) {
	if s.IsClosed() {
		return nil, ErrSessionShutdown
	}
	if atomic.LoadInt32(&s.remoteGoAway) == 1 {
		return nil, ErrRemoteGoAway
	}

	// Block if we have too many inflight SYNs
	select {
	case s.synCh <- struct{}{}:
	case <-s.shutdownCh:
		return nil, ErrSessionShutdown
	}

GET_ID:
	// Get and ID, and check for stream exhaustion
	id := atomic.LoadUint32(&s.nextStreamID)
	if id >= math.MaxUint32-1 {
		return nil, ErrStreamsExhausted
	}
	if !atomic.CompareAndSwapUint32(&s.nextStreamID, id, id+2) {
		goto GET_ID
	}

	// Register the stream
	stream := newStream(s, id, streamInit)
	s.streamLock.Lock()
	s.streams[id] = stream
	s.streamLock.Unlock()

	// Send the window update to create
	if err := stream.sendWindowUpdate(); err != nil {
		return nil, err
	}
	return stream, nil
}

// Accept is used to block until the next available stream
// is ready to be accepted.
func (s *Session) Accept() (net.Conn, error) {
	conn, err := s.AcceptStream()
	if err != nil {
		return nil, err
	}
	return conn, err
}

// AcceptStream is used to block until the next available stream
// is ready to be accepted.
func (s *Session) AcceptStream() (*Stream, error) {
	select {
	case stream := <-s.acceptCh:
		if err := stream.sendWindowUpdate(); err != nil {
			return nil, err
		}
		return stream, nil
	case <-s.shutdownCh:
		return nil, s.shutdownErr
	}
}

// Close is used to close the session and all streams.
// Attempts to send a GoAway before closing the connection.
func (s *Session) Close() error {
	s.shutdownLock.Lock()
	defer s.shutdownLock.Unlock()

	if s.shutdown {
		return nil
	}
	s.shutdown = true
	if s.shutdownErr == nil {
		s.shutdownErr = ErrSessionShutdown
	}
	close(s.shutdownCh)
	s.conn.Close()
	<-s.recvDoneCh

	s.streamLock.Lock()
	defer s.streamLock.Unlock()
	for _, stream := range s.streams {
		stream.forceClose()
	}
	return nil
}

// exitErr is used to handle an error that is causing the
// session to terminate.
func (s *Session) exitErr(err error) {
	s.shutdownLock.Lock()
	if s.shutdownErr == nil {
		s.shutdownErr = err
	}
	s.shutdownLock.Unlock()
	s.Close()
}

// GoAway can be used to prevent accepting further
// connections. It does not close the underlying conn.
func (s *Session) GoAway() error {
	return s.waitForSend(s.goAway(goAwayNormal), nil)
}

// goAway is used to send a goAway message
func (s *Session) goAway(reason uint32) header {
	atomic.SwapInt32(&s.localGoAway, 1)
	hdr := header(make([]byte, headerSize))
	hdr.encode(typeGoAway, 0, 0, reason)
	return hdr
}

// Ping is used to measure the RTT response time
func (s *Session) Ping() (time.Duration, error) {
	// Get a channel for the ping
	ch := make(chan struct{})

	// Get a new ping id, mark as pending
	s.pingLock.Lock()
	id := s.pingID
	s.pingID++
	s.pings[id] = ch
	s.pingLock.Unlock()

	// Send the ping request
	hdr := header(make([]byte, headerSize))
	hdr.encode(typePing, flagSYN, 0, id)
	if err := s.waitForSend(hdr, nil); err != nil {
		return 0, err
	}

	// Wait for a response
	start := time.Now()
	select {
	case <-ch:
	case <-s.shutdownCh:
		return 0, ErrSessionShutdown
	}

	// Compute the RTT
	return time.Now().Sub(start), nil
}

// keepalive is a long running goroutine that periodically does
// a ping to keep the connection alive.
func (s *Session) keepalive() {
	for {
		select {
		case <-time.After(s.config.KeepAliveInterval):
			s.Ping()
		case <-s.shutdownCh:
			return
		}
	}
}

// waitForSendErr waits to send a header, checking for a potential shutdown
func (s *Session) waitForSend(hdr header, body io.Reader) error {
	errCh := make(chan error, 1)
	return s.waitForSendErr(hdr, body, errCh)
}

// waitForSendErr waits to send a header with optional data, checking for a
// potential shutdown. If the body is not supplied then we will enforce the
// configured HeaderWriteTimeout, since this is a small control header.
func (s *Session) waitForSendErr(hdr header, body io.Reader, errCh chan error) error {
	var timeout <- chan time.Time
	if body == nil {
		timer := time.NewTimer(s.config.HeaderWriteTimeout)
		defer timer.Stop()

		timeout = timer.C
	}

	ready := sendReady{Hdr: hdr, Body: body, Err: errCh}
	select {
	case s.sendCh <- ready:
	case <-s.shutdownCh:
		return ErrSessionShutdown
	case <-timeout:
		return ErrHeaderWriteTimeout
	}

	select {
	case err := <-errCh:
		return err
	case <-s.shutdownCh:
		return ErrSessionShutdown
	case <-timeout:
		return ErrHeaderWriteTimeout
	}
}

// sendNoWait does a send without waiting. Since there's still a case where
// sendCh itself can be full, we will enforce the configured HeaderWriteTimeout,
// since this is a small control header.
func (s *Session) sendNoWait(hdr header) error {
	timer := time.NewTimer(s.config.HeaderWriteTimeout)
	defer timer.Stop()

	select {
	case s.sendCh <- sendReady{Hdr: hdr}:
		return nil
	case <-s.shutdownCh:
		return ErrSessionShutdown
	case <-timer.C:
		return ErrHeaderWriteTimeout
	}
}

// send is a long running goroutine that sends data
func (s *Session) send() {
	for {
		select {
		case ready := <-s.sendCh:
			// Send a header if ready
			if ready.Hdr != nil {
				sent := 0
				for sent < len(ready.Hdr) {
					n, err := s.conn.Write(ready.Hdr[sent:])
					if err != nil {
						s.logger.Printf("[ERR] yamux: Failed to write header: %v", err)
						asyncSendErr(ready.Err, err)
						s.exitErr(err)
						return
					}
					sent += n
				}
			}

			// Send data from a body if given
			if ready.Body != nil {
				_, err := io.Copy(s.conn, ready.Body)
				if err != nil {
					s.logger.Printf("[ERR] yamux: Failed to write body: %v", err)
					asyncSendErr(ready.Err, err)
					s.exitErr(err)
					return
				}
			}

			// No error, successful send
			asyncSendErr(ready.Err, nil)
		case <-s.shutdownCh:
			return
		}
	}
}

// recv is a long running goroutine that accepts new data
func (s *Session) recv() {
	if err := s.recvLoop(); err != nil {
		s.exitErr(err)
	}
}

// recvLoop continues to receive data until a fatal error is encountered
func (s *Session) recvLoop() error {
	defer close(s.recvDoneCh)
	hdr := header(make([]byte, headerSize))
	var handler func(header) error
	for {
		// Read the header
		if _, err := io.ReadFull(s.bufRead, hdr); err != nil {
			if err != io.EOF && !strings.Contains(err.Error(), "closed") && !strings.Contains(err.Error(), "reset by peer") {
				s.logger.Printf("[ERR] yamux: Failed to read header: %v", err)
			}
			return err
		}

		// Verify the version
		if hdr.Version() != protoVersion {
			s.logger.Printf("[ERR] yamux: Invalid protocol version: %d", hdr.Version())
			return ErrInvalidVersion
		}

		// Switch on the type
		switch hdr.MsgType() {
		case typeData:
			handler = s.handleStreamMessage
		case typeWindowUpdate:
			handler = s.handleStreamMessage
		case typeGoAway:
			handler = s.handleGoAway
		case typePing:
			handler = s.handlePing
		default:
			return ErrInvalidMsgType
		}

		// Invoke the handler
		if err := handler(hdr); err != nil {
			return err
		}
	}
}

// handleStreamMessage handles either a data or window update frame
func (s *Session) handleStreamMessage(hdr header) error {
	// Check for a new stream creation
	id := hdr.StreamID()
	flags := hdr.Flags()
	if flags&flagSYN == flagSYN {
		if err := s.incomingStream(id); err != nil {
			return err
		}
	}

	// Get the stream
	s.streamLock.Lock()
	stream := s.streams[id]
	s.streamLock.Unlock()

	// If we do not have a stream, likely we sent a RST
	if stream == nil {
		// Drain any data on the wire
		if hdr.MsgType() == typeData && hdr.Length() > 0 {
			s.logger.Printf("[WARN] yamux: Discarding data for stream: %d", id)
			if _, err := io.CopyN(ioutil.Discard, s.bufRead, int64(hdr.Length())); err != nil {
				s.logger.Printf("[ERR] yamux: Failed to discard data: %v", err)
				return nil
			}
		} else {
			s.logger.Printf("[WARN] yamux: frame for missing stream: %v", hdr)
		}
		return nil
	}

	// Check if this is a window update
	if hdr.MsgType() == typeWindowUpdate {
		if err := stream.incrSendWindow(hdr, flags); err != nil {
			if sendErr := s.sendNoWait(s.goAway(goAwayProtoErr)); sendErr != nil {
				s.logger.Printf("[WARN] yamux: failed to send go away: %v", sendErr)
			}
			return err
		}
		return nil
	}

	// Read the new data
	if err := stream.readData(hdr, flags, s.bufRead); err != nil {
		if sendErr := s.sendNoWait(s.goAway(goAwayProtoErr)); sendErr != nil {
			s.logger.Printf("[WARN] yamux: failed to send go away: %v", sendErr)
		}
		return err
	}
	return nil
}

// handlePing is invokde for a typePing frame
func (s *Session) handlePing(hdr header) error {
	flags := hdr.Flags()
	pingID := hdr.Length()

	// Check if this is a query, respond back in a separate context so we
	// don't interfere with the receiving thread blocking for the write.
	if flags&flagSYN == flagSYN {
		go func() {
			hdr := header(make([]byte, headerSize))
			hdr.encode(typePing, flagACK, 0, pingID)
			if err := s.sendNoWait(hdr); err != nil {
				s.logger.Printf("[WARN] yamux: failed to send ping reply: %v", err)
			}
		}()
	}

	// Handle a response
	s.pingLock.Lock()
	ch := s.pings[pingID]
	if ch != nil {
		delete(s.pings, pingID)
		close(ch)
	}
	s.pingLock.Unlock()
	return nil
}

// handleGoAway is invokde for a typeGoAway frame
func (s *Session) handleGoAway(hdr header) error {
	code := hdr.Length()
	switch code {
	case goAwayNormal:
		atomic.SwapInt32(&s.remoteGoAway, 1)
	case goAwayProtoErr:
		s.logger.Printf("[ERR] yamux: received protocol error go away")
		return fmt.Errorf("yamux protocol error")
	case goAwayInternalErr:
		s.logger.Printf("[ERR] yamux: received internal error go away")
		return fmt.Errorf("remote yamux internal error")
	default:
		s.logger.Printf("[ERR] yamux: received unexpected go away")
		return fmt.Errorf("unexpected go away received")
	}
	return nil
}

// incomingStream is used to create a new incoming stream
func (s *Session) incomingStream(id uint32) error {
	// Reject immediately if we are doing a go away
	if atomic.LoadInt32(&s.localGoAway) == 1 {
		hdr := header(make([]byte, headerSize))
		hdr.encode(typeWindowUpdate, flagRST, id, 0)
		return s.sendNoWait(hdr)
	}

	// Allocate a new stream
	stream := newStream(s, id, streamSYNReceived)

	s.streamLock.Lock()
	defer s.streamLock.Unlock()

	// Check if stream already exists
	if _, ok := s.streams[id]; ok {
		s.logger.Printf("[ERR] yamux: duplicate stream declared")
		if sendErr := s.sendNoWait(s.goAway(goAwayProtoErr)); sendErr != nil {
			s.logger.Printf("[WARN] yamux: failed to send go away: %v", sendErr)
		}
		return ErrDuplicateStream
	}

	// Register the stream
	s.streams[id] = stream

	// Check if we've exceeded the backlog
	select {
	case s.acceptCh <- stream:
		return nil
	default:
		// Backlog exceeded! RST the stream
		s.logger.Printf("[WARN] yamux: backlog exceeded, forcing connection reset")
		delete(s.streams, id)
		stream.sendHdr.encode(typeWindowUpdate, flagRST, id, 0)
		return s.sendNoWait(stream.sendHdr)
	}
}

// closeStream is used to close a stream once both sides have
// issued a close.
func (s *Session) closeStream(id uint32) {
	s.streamLock.Lock()
	delete(s.streams, id)
	s.streamLock.Unlock()
}

// establishStream is used to mark a stream that was in the
// SYN Sent state as established.
func (s *Session) establishStream() {
	select {
	case <-s.synCh:
	default:
		panic("established stream without inflight syn")
	}
}